Hallo, ich bin Lennart aus die Niederlande. Mein Deutsch sind nicht so gut - so I am posting this in English which I do understand a lot better. I hope the moderators allow this, it is easier for me to converse with you this way. I think most of you understand English anyways, so I assume it should not be a problem. I am selling my Fawowa I finished building earlier this year (98% finished). It has minimal usage and quite a few nice features. It's design is based on Rene (Grune Fawowa) and Rene (groBe Blaue Fawowa).
Features include: Alu base, 6mm doppelsteckplatte/gewachshausplatte, isolated with both reflective bubblewrap (4mm) and 1cm styrofoam. Outer design in Army/NATO Green color (Oracal wrap) with black trimming/edges and striping. Made watertight by closing everything with a silicon/rubber sealant in black color. Inner wrap is white-ish wood pattern for walls, brown wood for bottom sides. It has three 50W (150w total) solar panels on front, 230WH li-ion battery (can be loaded through external 230v connection) with solar charger and a 500W inverter for 230v connection. In-line breakers installed on the electric panel. USB Cooling fan which can be regulated with a turning knob. Large skylight, four windows total, of which one (broad porthole) can be opened. Door on left side (standing from back), with alu handle on the inside, two locks, can be locked from in and outside.
Can sit up to three persons or sleep 2 persons (though it is tight, it's certainly possible!). Uses a modular box system, these 3 boxes can be taken out to reduce weight or put back in and interlocked to form a second sleeping area. When the boxes are outside, you can put the cushions on them to form seats, or a table. Hinge system for large storage area underneath the siting area. Custom lightweight cushions, memory foam, with faux creme white leather, can be taken off to access the storage.
Two compartment doors can be used to form tables, table 1 sits on a rail and has a hinged support. Table two is a interconnect support (attached to rail), table is formed from the top of the big box in the middle which interlocks. Both tables can be moved horizontally on the interlocking rail system, and be put in various positions (even on the entry door rail itself in a mirrored way!), allowing for much modularity and variation.
Usb connection on the top right, with holder for phone. LED lightswitch (mounted next to door entry) for lighting. Small compartment near roof in brown wrap which houses the 230v connection and USB fan regulator, and has additional wiring for a 12v battery meter or something else. Can be used for small storage like toiletries. Another small compartment drawer just below the left tire housing for cutlery or whatever.
4 stainless steel adjustable poles for stabilizing (you can convert these to alu to save some weight), strong connection bar to bike and 20 inch wheels (removable) from Donkey Trailers (BE). Reflective stickers in each corner.
Dimensions: 178cm height, 2m length (2,38m with bike bar attachment), 93,5 cm width. Inner room 89.5cm width, 1.96cm length.
Weight (unloaded): With boxes and all cushions ~70 KG, dry weight without boxes or cushions ~65KG.
Overall this is a very versatile bike camper/fahrradwohnwagen with modularity. It has not been used much, only a few times!
Important: I am based in the Netherlands, you can pick it up in Rotterdam. You can of course take a little test run with it and check everything out!
Price: Bidding starts at €2500. Cash or bank-transfer only.
Contact me through a comment below or private message for additional (building) photos, details or questions (in English or Dutch please).
Photos:
Danke Schon!
